Saft LS33600
SKU: LS33600
Price: $2,160.00 (only $18.00/battery)
Case of 120
Key Features
- High capacity and high energy (1185 Wh/l and 680 Wh/kg)
- High voltage response, stable during most of the lifetime of the application
- Wide operating temperature range (-60°C/+85°C)
- Low self-discharge rate, compatible with long operating life (less than 1% per year of storage, at +20°C, after 1 year)
- Superior resistance to corrosion
- Low magnetic signature
- Designed to meet all major quality, saftey and environmental standards
Physical Construction
- Bobbin construction
- Well controlled passivation
- Hermetic construction with glass-to-metal seal
- Stainless steel container
- Non-flammable electrolyte
- RoHS and REACH compliance
- Made in France
Our Saft LS-26500 Review
Works Great With:
- Utility metering
- Internet of Things
- Alarms and security
- Medical devices
- Tracking systems
- Professional electronics
Downloads
Spec Sheet:
Saft LS33600 Specification Sheet
MSDS (Material Safety Data Sheet):
Saft LS33600 Material Safety Data Sheet / Article Information Sheet
Saft Lithium Handbook / Application Manual:
Specifications
Cell Size
D
Voltage
3.6
Capacity
17.0Ah
Cell Construction
Bobbin
Pulse Capability
Typically up to 400mA
Max Continuous Current
250mA
Max Pulse Discharge Rate
0.4A
Dimensions
33.3x61.3mm (1.31x2.41in)
Weight
90g (3.2oz)
Lithium Metal Content
Approx. 4.5g
Termination
Flat Contact (button-top)
Operating Temperature
-60°C to 85°C (-76°F to 185°F)
Storage Temperature
+30°C (+86°F) max
Shelf Life
Saft lithium-thionyl chloride batteries have a low self-discharge rate of less than 1% per year in storage at +20°C). The storage area should be clean, cool, dry and ventilated.
Transportation
Please refer to the Battery Information Sheet / Material Safety Data sheet. Batteries are ARTICLES according to REACH and OSHA and are not required to produce an MSDS.
Warnings
Fire, explosion and burn hazard. Do not recharge, short circuit, crush, disassemble, heat above 100°C (212°F), incinerate, or expose contents to water. Do not solder directly to the cell (use tabbed cell versions instead).